JJ Music Lessons

Harmonica pedals

Last Updated 12/16/2021


Here's a pedal case with harmonicas that my friend uses when he's playing. 

Here's a good article by Randy Landry- 


Electronic Effects and the Harp Player - Randy Landry


Since sixteen year old Christian Buschmann invented the modern harmonica in 1821, harmonica players have been using effects to enhance and add color to their tone. Tongue blocking, articulation and hand cupping were there in the beginning and are still at the heart of harmonica playing today. In this article we will consider the role electronics has played in effects for the harmonica player and guidelines on choosing devices. It is important to remember that great amplified tone begins with great acoustic tone. Even the best harp amplifiers, effect pedals and microphones cannot improve bad acoustic tone, they only add effect and make it louder. So don’t neglect your acoustic tone, it comes first.


Harmonicas do not produce much volume so when vacuum tube amplifiers first hit the music scene it was not long before harmonica players were playing into microphones connected to amplifiers and were able to be heard better than ever before. What happened next? It is my guess that the guitar players turned their amps up and got louder. Now with the guitar players playing as loud as they could (imagine that, LOL) the harp player had to get closer and closer and eventually he had to cup his hands around the microphone to still be heard. With the microphone removed from the stand and cupped in his hands the harp player found what was to become the Holy Grail of harp effect; harp played into a tightly cupped microphone plugged into a vacuum tube guitar amplifier turned up as far as possible and distorting. People stood up and took notice, what a great new sound. Little Walter is generally credited with being the first to use this effect; maybe he was, who knows? One thing is for sure, Little Walter made it popular, so popular in fact that now, 50 years or so later we are still seeking that sound. This sound, this effect, has grown to define blues harp, an entire genre of music.


Now here we are in the 21st century and not much has changed. Why? Probably because harp players have never been taken very seriously by producers of musical equipment, i.e. microphones, amplifiers, and effect pedals. Not to mention that Little Walter left such an impact that most players since have never looked beyond his sound and style of play. Little Walter didn’t need it so why should I? Many players have spent a lifetime trying to recapture the past, not that this is bad because millions love the sound of amplified harp. I, for one, am glad there have been those who have carried on this tradition.


But, what if the blues greats of the past had products made specifically for them, the blues harp player. Would any of them have used an amplifier designed specifically for the harp player and not a guitar player; an amplifier with less feedback, more usable volume and a fat overdriven tone? An example of a great harp amp is the Harpgear amp produced by Brian Purdy. Would they have used a Harmonica Honker microphone or a Blowsmeaway Productions microphone? What about a Lone Wolf Blues Co. delay pedal, octave pedal or a tube distortion pedal designed for harp players by yours truly; Randall Landry? The Holmes Harp Commander? What do you think? Besides these offerings you can find custom accessories by Cumberland Cases. I believe that all musicians share one thing in common and that is the desire to sound as good as possible, the quest for the ultimate tone, it is that way today and I believe it was that way in the days of Little Walter. Fortunately; the harmonica players are now seeing a day where they actually have options; equipment that is being designed specifically for them, the modern harp player.


There are many factors that go into equipment designed for harp and it starts at the microphone. This information is intended to help harp players choose the effect equipment that will work best for their unique application and highlight the differences with equipment designed for guitar. Hopefully it will bring you one step closer in the quest for the ultimate tone.


  1. Proper termination: The microphone of choice is still the vintage crystal or controlled magnetic bullet microphone and these elements are high impedance elements. When choosing equipment that a high impedance microphone will connect to be sure that it has a high impedance input. A manufacturer should be able to tell you the input impedance of their product. Look for a value between 1 and 10 meg ohms for best performance and a fatter tone with more bottom. A solid-state device such as an effect pedal should utilize a buffered input for maximum performance; a buffered input will produce the fattest tone possible. An impedance of less than 1 meg ohm can cause you to lose your bass frequencies and result in a thin tone; especially with a crystal microphone. Low impedance dynamic microphones are also popular, they are very clean (when this is the tone you are looking for) and they allow for long cables, if you use a low impedance microphone and connect to a high impedance instrument amplifier or effect pedal you must use an impedance matching transformer.
  2. Correct gain: A microphone produces a much higher signal than a guitar pickup coil, this is the primary reason feedback is such a problem for the harp player. Look for equipment that has less preamp gain than a standard guitar device (amp or effect). Effect pedals are primarily solid-state devices and excessive gain here can cause solid state distortion, which is an unpleasant sound.
  3. Coupling between stages: Frequencies produced by a harmonica are lower than guitar frequencies. Typical guitar products, when used for harp, reduce or eliminate entirely the lower frequencies resulting in a thinner and brighter tone. Products designed for the harp player utilize the proper coupling component value to eliminate this problem; this is key to producing the tone harp players are searching for.
  4. Ease of control setting: Effect products for guitar players are often "over the top" for harp players, they offer too much effect which makes the effect hard to set for the harp player; in other words, a small turn on a control can cause a major change in the sound or send you into feedback.
  5. There are certainly more factors that the designer considers but the intent here is to give the harmonica player information that will assist him in choosing equipment that will perform best for his application. The market for products for the harmonica player is essentially a niche market that is too small for the major players to bother with; but now, thanks to the Internet, small business owners such as myself are able to reach out to the world and offer our products. It has been my finding that most of us who produce these products are doing so out of a love for blues harp. It is both our passion that drives us and our own quest for the ultimate tone that makes it possible for other harp players to now have a choice, a choice of quality products built just for them.


My name is Randall Landry, owner of Lone Wolf Blues Company. I began my electronic career in 1978 studying vacuum tubes and transistors in trade school. I have worked 26 years in the communications (electronics) industry and I am currently employed as a refinery operator. I began learning harp a few years back and as is the natural progression it led to tube amps; being an electronic technician I decided to build my own and when I decided I wanted a delay pedal well I built one of them also, I now offer a complete line of harp effect pedals that are available to the blues harp community at www.lonewolfblues.com


image
Recital August 23rd at the Folsom Hotel JJ Music Lessons Gig/ Recital August 23rd at the Folsom Hotel 1.  Private Lessons Teacher (Voice, Guitar...
Producer Camp (Recording) Producer Camp- July 21st through the 26th (Monday through Friday) from 9am to 5pm. Cost- $800What we accomplish- 1. Songwriting2. Prepod...
image
Miss Someone by the Overdrive Junkies Folsom Recording S... This is Miss Someone by the Overdrive Junkies. Lead Vocals- Cat Higgins Guitars and Bass- Jon Jimmerson Drums- Michael Woodward Recor...
image
Be the Boss- Overdrive Junkies Here is a new song Jon Jimmerson produced.  This is Be the Boss by the Overdrive Junkies. Lead Vocals- Cat Higgins Guitars and Bass...